COBRASOUND.com

The FBT HiMaxx40A is "the FBT Maxx4A on steroids!" Taking everything you loved about the Maxx4A and making it even better. The HiMaxx40A is just is more powerful, has even more bass, and is just as lightweight!

Here are some other features of the FBT HiMaxx40A:

• 2-Way Bi-Amp Processed Active Monitor System
• 500W Class D (LF) + 150W Class G (HF) Power Amplifiers. Comparing with the FBTMaxX 4a, these new built in-amplifiers offer an increased power capacity of +200W for the LF woofer and +50W for the HF driver. Peak power has almost doubled with up to 1000W for the LF woofer
• +4dB more SPL (@1mt / music signal), thanks to the higher power handling, to a woofer offering a lower power compression and to a more sophisticated limiting circuit.
• Increased efficiency with the addition of the very latest switch mode power supply and a Class G amplifier for the HF compression driver
• Excellent WEIGHT/POWER ratio. HiMaxX 40a weighs just a bit more than the FBTMaxX 4a while the total power capacity has almost doubled
• New FBT proprietary designed 12” (3” VC) B&C® custom made neodymium magnet woofer, has a more efficient ventilation system resulting in a 1.5dB reduction of power compression and a more rigid cone for increased reliability. The internal coil has 75mm (3”) diameter for greater power handling and reliability
• New B&C® 1” (1.7” VC) HF compression driver with shorting copper cup for improved extension and efficiency in the mid-frequencies and lower distortion. The coil measures 44mm (1.7”) diameter and the driver is coupled to a 90°H x 60°V constant directivity horn
• New FBT proprietary gas-injection polypropylene moulded asymmetrical trapezoidal design enclosure of extremely high quality, lightness, strength, resistance, flexibility and applications. The total volume increases +5Lt of load to the woofer, maintaining the same width and height of the FBTMaxX4 model, whilst producing a more powerful bass response. The reflex tuning ports are newly designed and optimised to reduce turbulences and compression.
• Combined Gain and Volume functions in the same rotary potentiometer offer easier and quicker control and provide an improved dynamic range and S/N ratio at the input stage
• MIC/LINE input selector with Peak led
• 2 independent input channels (1 x XLR/Jack, 1 x AUX L/R Cinch RCA with volume) to connect also external devices such as MP3, CD, PC, players. This feature may replace the use of an external mixer in such applications like: microphone music base
• 3-band equalization (High/Mid/Low)
• Ground Lift switch
• 3 x Status LEDs: Power, Limiter, Protection